MRN-W10S4-IB-LW
10-Inch White Marine Subwoofer with Integrated RGB Lighting and IP66 Waterproof Design
$599.95
MRN-W10S4-IB-LW
10-Inch White Marine Subwoofer with Integrated RGB Lighting and IP66 Waterproof Design
$599.95
Check if this fits your vehicle
Product Overview
Bring deep, controlled bass to the water in a compact 10-inch design. Built on Alpine’s legendary R-Series platform, the MRN-W10S4-IB-LW combines powerful output, long-excursion performance, and marine-ready durability.
Features
- Premium 10" marine subwoofer sold individually
- Built on Alpine’s legendary R-Series platform
- Alpine Signature Sound optimized for outdoor listening
- 600W RMS / 1,800W peak power handling
- 20 mm Xmax for powerful bass impact
- 4-ohm single voice coil
- Optimized for infinite-baffle installations
- Compatible with sealed enclosures; ported enclosures not recommended
- Ultra-rigid polypropylene and carbon-fiber parabolic cone
- High Amplitude Multi-Roll (HAMR) surround
- Double-stacked strontium ferrite motor
- IP66-certified dust- and water-resistant assembly
- Salt, fog, UV, and vessel water-tightness tested
- Integrated 4-pin RGB LED optical-diffusion grille (Controller and Remote Required)
- Compatible with KTX-MRN-LED-RF LED Controller & Remote
- Black version available separately (MRN-W10S4-IB-LB)
Tech Specs
Power Handling: 600W RMS / 1,800W peak
Nominal Impedance: 4 ohms
Frequency Response: 30 Hz – 150 Hz
Sensitivity: 84.5 dB (1W/1m)
Xmax: 20 mm
Voice-Coil Configuration: Single voice coil
Voice-Coil Diameter: 65 mm
Motor Structure: High-grade double-stacked strontium ferrite magnet assembly
Cone Material: Ultra-rigid polypropylene and carbon-fiber parabolic cone
Surround: High Amplitude Multi-Roll (HAMR)
Installation Type: Optimized for infinite-baffle applications
Enclosure Compatibility: Compatible with sealed enclosures; not recommended for ported enclosures
Recommended Subsonic Filter: 25Hz when used with a mono amplifier
Cutout Diameter: 9-1/16" (231 mm)
Mounting Depth: 6-3/4" (172 mm)
Grille Protrusion: 2-11/16" (68 mm)
Outer Grille Diameter: 10-27/32" (275.5 mm)
Grille: Fixed, non-removable white grille
Protection Rating: IP66-certified dust- and water-resistant assembly
Salt and Fog Resistance: ASTM B117 tested
UV Resistance: ASTM G154 tested
Speaker Connection: 2-pin waterproof Deutsch connector
RGB LED Connection: 4-pin waterproof Deutsch connector
Lighting: Integrated 4-pin RGB LED optical-diffusion grille
LED Control: Controller and remote required
Compatible LED Controller: KTX-MRN-LED-RF, sold separately
Included Hardware: Waterproof speaker connector, waterproof RGB connector, (6) six mounting screws, and hex key
Big Bass in a More Compact Design
A subwoofer gives marine music the depth and energy that speakers alone cannot provide. The MRN-W10S4-IB-LW delivers 600 watts RMS and uses a long-excursion design to move more air for stronger low-frequency impact. Kick drums hit with greater weight, bass lines sound fuller, and the entire system feels more complete. Its 10-inch format brings powerful Alpine bass to boats where installation space may be limited, helping the low end remain present even as wind and engine noise build throughout the boat.
Protected for Life on the Water
The MRN-W10S4-IB-LW is built for the conditions that come with life on the water. Its IP66-certified dust- and water-resistant construction helps protect against dust and powerful water spray, while salt, fog, and UV resistance support lasting durability in demanding marine environments. Separate waterproof connections protect the speaker signal and RGB lighting wiring, and the fixed white grille maintains a clean, polished appearance. Included connectors and mounting hardware help support a secure installation season after season onboard.
Made for Infinite-Baffle Installations
The MRN-W10S4-IB-LW is optimized for infinite-baffle marine installations, using the open space behind the mounting panel instead of requiring a separate enclosure. This preserves valuable onboard storage and keeps installation simpler by eliminating the added cost, construction, and enclosure calculations of a traditional subwoofer box. Its compact 10-inch format also helps fit more installation locations. It can also be used in a properly engineered sealed enclosure. Ported enclosures are not recommended.
Powerful Bass That Stays Controlled
Deep bass should feel powerful, not loose or muddy. The MRN-W10S4-IB-LW uses a rigid carbon-fiber hybrid cone and high-excursion suspension to keep the woofer moving smoothly and accurately as the volume rises. The result is bass that hits with authority, starts and stops cleanly, and adds impact without overwhelming the rest of the music. Whether cruising at speed, relaxing at anchor, or entertaining at the dock, every track gains a stronger, more controlled foundation with the detail and balance of Alpine Signature Sound.
Distinctive Style with RGB Lighting
A fixed white grille gives the MRN-W10S4-IB-LW a clean, refined presence that complements white fiberglass, light interiors, and modern marine finishes. Integrated 4-pin RGB LED lighting shines through an optical-diffusion grille for a smooth, even glow after sunset, creating anything from subtle accent lighting to a more energetic atmosphere onboard. LED operation requires a compatible controller and remote, sold separately. Pair the subwoofer with Alpine’s KTX-MRN-LED-RF LED Controller & Remote for convenient lighting control.
Build Your Alpine Marine Bass System
Add the MRN-W10S4-IB-LW to an Alpine Marine system when you want deeper bass without giving up more space than necessary. Pair it with the M-A110V 5-Channel Marine Amplifier for a streamlined speaker-and-subwoofer system, or choose the M-A120M 1200-Watt Mono Marine Amplifier for dedicated bass power and future expansion. Integrated 4-pin RGB LED lighting adds a custom glow after sunset when connected to the optional KTX-MRN-LED-RF LED Controller & Remote, sold separately, creating a system that looks as complete as it sounds.
MRN-W10S4-IB-LW
