M-A60F
4-Channel Marine Amplifier with 600W of Flexible System Power and IPX6 Waterproof Chassis
$899.95
M-A60F
4-Channel Marine Amplifier with 600W of Flexible System Power and IPX6 Waterproof Chassis
$899.95
Check if this fits your vehicle
Product Overview
Power four marine speakers or bridge the M-A60F for a high-output speaker and subwoofer system. It delivers 600 watts of rated power, flexible tuning, and marine-ready protection in one compact chassis.
Features
- 4-channel marine amplifier
- 600W of combined rated system power
- 150W RMS x 4 at 4Ω or 2Ω
- 300W RMS x 2 bridged at 4Ω
- Flexible speaker and subwoofer configurations
- Best-in-class thermal handling
- Designed for extended all-day playback
- Automatic Two-stage thermal protect circuit
- IPX6-rated waterproof chassis
- Salt, fog, and UV resistant
- Watertight top-panel control cover
- Included terminal boots protect power and speaker connections
- One-side terminal and connection layout
- Detachable ABYC-compliant terminals
- High- and low-level input compatibility
- Compatible with RUX-M-UNIV Bass Knob when Channels 3/4 power a subwoofer
Tech Specs
Amplifier Type: 4-channel
Power Output (4Ω): 150W RMS x 4
Power Output (2Ω): 150W RMS x 4
Bridged Power (4Ω): 300W RMS x 2
Frequency Response: 10 Hz–36 kHz
Ch. 1–4 Crossover: Off/HP/LP, 50–400 Hz
Crossover Slope: –12 dB/octave
Ch. 3/4 Subsonic Filter: 10–50 Hz
Ch. 3/4 Bass EQ: 0 to +12 dB at 45 Hz
Input Sensitivity: 200 mV–4V low / 500 mV–10V high
Operating Voltage: 7–16.5V DC
External Fuse Rating: 60A
Power Terminals: 0 AWG; compatible with 4 AWG using included reducers
Speaker Output Terminals: 10 AWG
Waterproof Rating: IPX6-rated chassis
Salt and Fog Resistance: ASTM B117 tested
UV Resistance: ASTM G154 tested
Chassis Dimensions: 9.69" W x 6.5" D x 2.15" H
Overall Dimensions: 10.55" W x 6.87" D x 2.15" H, including terminals and mounting tabs
Mounting Pattern: 10.12" W x 5.1" D, center-to-center
Mounting Spacers: Add 0.3" to installed height
Remote Level Control: Optional RUX-M-UNIV adjusts Channels 3/4 output level
Owner's Manual
M-A60F Owner's Manual
M-A60F Owner's Manual
Power That Adapts to Your System
The M-A60F delivers 150 watts RMS per channel at both 4 and 2 ohms, giving installers more freedom to build a high-output marine system without sacrificing rated power as the speaker load changes. Use all four channels for a complete speaker system, bridge one pair for a 300-watt subwoofer while powering two speakers, or bridge both pairs for two 300-watt outputs. That flexibility makes it easier to match the amplifier to the boat while keeping music clear, energetic, and strong enough to rise above wind, waves, and engine noise.
Protected for Life on the Water
The M-A60F is engineered for the conditions that come with life on the water. Its IPX6-rated waterproof chassis helps protect against powerful water spray, while salt, fog, and UV resistance support long-term durability in demanding marine environments. A watertight top-panel cover shields the tuning controls, and included terminal boots and a remote-port cover add protection at key connection points. Together, these features help support reliable performance through changing weather and repeated days on the boat.
Complete Your Alpine Marine System
The M-A60F is an ideal foundation for powering four Alpine Marine speakers, with flexible tuning to help each pair perform at its best. Choose from 6.5-inch, 7.7-inch, or 8.8-inch coaxial speakers, or add 8.8-inch preloaded speaker cans for more installation flexibility. Select the sizes, locations, and finishes that complement your boat, then expand with an Alpine Marine subwoofer and mono amplifier for added depth and impact. Every component is designed to work together for a complete Alpine experience from bow to stern.
Tune It for the Boat
Every boat and speaker layout is different, so the M-A60F provides the control needed to shape the system around the installation. Independent gain controls with clip indicators help simplify setup, while selectable high-pass and low-pass filters allow each channel pair to be optimized for full-range speakers, midbass drivers, or a subwoofer. Channels 3/4 also include adjustable bass EQ and a subsonic filter to add impact and protect the connected subwoofer. When those channels are used for bass, the optional RUX-M-UNIV Bass Knob provides convenient level control from the listening position.
Built to Keep the Music Playing
Long days on the water can place heavy demands on an amplifier, especially when the music stays turned up. The M-A60F combines a large finned heat-sink design with best-in-class thermal handling and an advanced thermal protection circuit. As temperatures rise, the amplifier can automatically manage its output to reduce heat and help prevent shutdown. Once operating temperatures return to normal, full output is automatically restored for dependable performance throughout extended listening sessions.
Designed for a Cleaner Installation
All signal, power, and speaker connections are arranged along one side, while the tuning controls sit beneath a removable top cover for convenient access and a clean finished appearance. Detachable, ABYC-compliant terminals simplify wiring, and high-level input compatibility supports integration with factory or aftermarket sources. The included mounting spacers, stainless hardware, terminal boots, wire reducers, and installation tools help support a secure, professional installation with fewer additional parts to source.
M-A60F
