MRN-W12S4-IB-LW
12-Inch White Marine Subwoofer with Integrated RGB Lighting and IPX6 Waterproof Design
$699.95
MRN-W12S4-IB-LW
12-Inch White Marine Subwoofer with Integrated RGB Lighting and IPX6 Waterproof Design
$699.95
Check if this fits your vehicle
Product Overview
Bring deep, controlled bass to every day on the water. Built on Alpine’s legendary R-Series platform, the MRN-W12S4-IB-LW combines 600 watts RMS, long-excursion performance, Alpine Signature Sound, and marine-ready durability.
Features
- Premium 12" marine subwoofer sold individually
- Built on Alpine’s legendary R-Series platform
- Alpine Signature Sound optimized for outdoor listening
- 600W RMS / 1,800W peak power handling
- 20 mm Xmax for powerful bass impact
- 4-ohm single voice coil
- Optimized for infinite-baffle installations
- Compatible with sealed enclosures; ported enclosures not recommended
- Ultra-rigid polypropylene and carbon-fiber parabolic cone
- High Amplitude Multi-Roll (HAMR) surround
- Double-stacked strontium ferrite motor
- IP66-certified dust- and water-resistant assembly
- Salt, fog, UV, and vessel water-tightness tested
- Integrated 4-pin RGB LED optical-diffusion grille (Controller and Remote Required)
- Compatible with KTX-MRN-LED-RF LED Controller & Remote
- Black version available separately (MRN-W12S4-IB-LB)
Tech Specs
Power Handling: 600W RMS / 1,800W peak
Nominal Impedance: 4 ohms
Frequency Response: 25 Hz–150 Hz
Sensitivity: 86.0 dB (1W/1m)
Xmax: 20 mm
Voice-Coil Configuration: Single voice coil
Voice-Coil Diameter: 65 mm
Motor Structure: High-grade double-stacked strontium ferrite magnet assembly
Cone Material: Ultra-rigid polypropylene and carbon-fiber parabolic cone
Surround: High Amplitude Multi-Roll (HAMR)
Installation Type: Optimized for infinite-baffle applications
Enclosure Compatibility: Compatible with sealed enclosures; not recommended for ported enclosures
Recommended Subsonic Filter: 25 Hz when used with a mono amplifier
Cutout Diameter: 10-13/16" (275 mm)
Mounting Depth: 7-9/32" (185 mm)
Grille Protrusion: 2-11/16" (68 mm)
Outer Grille Diameter: 12-3/4" (324 mm)
Grille: Fixed, non-removable white grille
Protection Rating: IP66-certified dust- and water-resistant assembly
Salt and Fog Resistance: ASTM B117 tested
UV Resistance: ASTM G154 tested
Speaker Connection: 2-pin waterproof Deutsch connector
RGB LED Connection: 4-pin waterproof Deutsch connector
Lighting: Integrated 4-pin RGB LED optical-diffusion grille
LED Control: Controller and remote required
Compatible LED Controller: KTX-MRN-LED-RF, sold separately
Included Hardware: Waterproof speaker connector, waterproof RGB connector, (6) six mounting screws, and hex key
Bass That Carries Across the Water
Out on the water, bass has to work harder to be heard and felt. The MRN-W12S4-IB-LW combines 600 watts RMS of power handling with a long-excursion design that moves more air for stronger low-frequency impact. Kick drums hit with greater weight, bass lines feel fuller, and the entire system gains the depth that marine speakers alone cannot provide. Whether cruising at speed, relaxing at anchor, or entertaining at the dock, the music sounds bigger, more energetic, and more complete throughout the boat.
Protected for Life on the Water
The MRN-W12S4-IB-LW is built for the conditions that come with life on the water. Its IP66-certified dust- and water-resistant construction helps protect against dust and powerful water spray, while resistance to salt, fog, and UV exposure supports lasting durability in demanding marine environments. Separate waterproof connections help protect the speaker signal and RGB lighting wiring, and included connectors and mounting hardware support a clean, secure installation season after season onboard.
Made for Infinite-Baffle Installations
The MRN-W12S4-IB-LW is optimized for infinite-baffle marine installations, using the open space behind the mounting panel instead of requiring a traditional subwoofer enclosure. This helps preserve valuable onboard storage while adding powerful, full-bodied bass to the system. Its flexible design also supports use in a properly engineered sealed enclosure when the installation calls for one. Ported enclosures are not recommended, helping keep system planning simple and performance consistent.
Powerful Bass That Stays Controlled
Built on Alpine’s legendary R-Series platform, the MRN-W12S4-IB-LW uses an ultra-rigid polypropylene and carbon-fiber parabolic cone with a high-excursion suspension to keep bass powerful and controlled as the volume rises. A large 65 mm voice coil, double-stacked magnet, and integrated airflow help manage heat during extended playback. Together, these technologies deliver bass that hits with authority, starts and stops cleanly, and gives the music a deep, commanding foundation whether cruising at speed or entertaining at the dock.
Distinctive Style with RGB Lighting
A fixed white grille gives the MRN-W12S4-IB-LW a clean, refined presence that complements white fiberglass, light interiors, and modern marine finishes. Integrated 4-pin RGB LED lighting shines through an optical-diffusion grille for a smooth, even glow after sunset, creating anything from subtle accent lighting to a more energetic atmosphere onboard. LED operation requires a compatible controller and remote, sold separately. Pair the subwoofer with Alpine’s KTX-MRN-LED-RF LED Controller & Remote for convenient lighting control.
Build Your Perfect System
Add the MRN-W12S4-IB-LW to an Alpine Marine system when you want the music to feel as powerful as it sounds. Pair it with the M-A110V 5-Channel Marine Amplifier for a streamlined system that powers both speakers and a subwoofer, or choose the M-A120M 1200-Watt Mono Marine Amplifier for dedicated bass power and the ability to run one or two compatible subwoofers. Integrated RGB lighting adds a custom glow after sunset when connected to the optional KTX-MRN-LED-RF LED Controller & Remote.
MRN-W12S4-IB-LW
