Press Releases

Torrance, Calif. (Jan. 6, 2015) - Alpine Electronics of America, Inc. debuted a new MRV amplifier at the 2015 International CES taking place Jan. 6-9 at the Las Vegas Convention Center. The MRV-V500 is a 5-channel amplifier joining the V-Power lineup.

“Alpine has an amplifier to meet every system size and budget,” said Steve Crawford, vice president and general manager, aftermarket business unit, Alpine Electronics of America, Inc. “In particular, the new MRV-V500 5-channel amplifier and the PDR lineup are great complements to the Alpine Restyle truck and SUV product initiative.”

The new MRV-V500 is a flexible amplifier that fills a gap in the V-Power lineup, offering a 5-channel model for this entry level line. The MRV-V500 will also be offered as part of the PSS-21GM, a packaged sound system for 2007-2013 full size GM trucks, which is part of the Alpine Restyle lineup. The PSS-21GM, due in spring 2015, consists of the MRV-V500, a truck-specific speaker system (SPT-21GM, for 2007-2013 full size GM trucks) and a direct fit subwoofer for the compatible trucks. Alpine Restyle is a category of products which are engineered by Alpine for use in specific full-size trucks and SUVs. Previously, the Alpine Restyle products consisted of in-dash 9-inch entertainment/navigation systems, but the category is now expanding to include truck sound systems and drive assist products.

The PDR amplifiers that were introduced in 2014 will remain in the lineup for 2015. These amplifiers are ideal for powering a truck system, thanks to their big power output in a small footprint. They offer quiet performance through an ultra-low signal to noise ratio; ultra-high damping factor for clean and tight bass; and a high efficiency design that allows for improved thermal management to prevent shutdown.

The rest of the 2015 lineup consists of the entry level V-Power lineup, the premium PDX amplifiers and the MRX-M110 from the X-Power series – all carrying over from 2014. Also available are Head Unit Power Packs which are small amplifiers that boosts the power of head units. The KTP-445A (for select 2005 and new Alpine head units) and the KTP-445U (for virtually any source unit) increase the power of a head unit to 45W RMS x 4, while the KTP-190U is a mono model designed to power a factory subwoofer and provide a 90W RMS x 1 power boost.

The MRV-V500 will be available in April. All other amplifiers are available now at authorized Alpine retailers, visit www.alpine-usa.com for a store locator.

V-Power Series Amplifiers

MRV-V500 5-Channel Digital Amplifier

• CEA-2006 amplifier ratings: 40W RMS x 4 + 150W RMS x 1 (4 ohm, 14.4V ≤0.07% THD+N); 60W RMS x 4 + 250W RMS x 1 (2 ohm, 14.4V ≤0.09% THD+N)
• S/N ratio: 81dB (ref: 1W into 4 ohm])
• Remote bass knob compatible (requires RUX-KNOB, sold separately)
• Available: April
• SRI: $380.00

MRV-M500 Mono Digital Amplifier

• CEA-2006 amplifier ratings: 300W RMS x 1 [4 ohm @14.4V ≤1% THD + N]; 500W RMS x 1 [2 ohm @ 14.4V ≤ 1% THD + N]
• S/N ratio: 85dB (ref: 1W into 4 ohm)
• Remote bass knob compatible (requires RUX-KNOB, sold separately)
• SRI: $230.00

MRV-M250 Mono Digital Amplifier

CEA-2006 amplifier ratings: 150W RMS x 1 [4 ohm @14.4V ≤1% THD + N]; 250W RMS x 1 [2 ohm @ 14.4V ≤ 1% THD + N]

S/N ratio: 85dB (ref: 1W into 4 ohm)

Remote bass knob compatible (requires RUX-KNOB, sold separately)

SRI: $170.00

MRV-F300 4/3/2 Channel Digital Amplifier

• CEA-2006 amplifier ratings: 50W RMS x 4 [4 ohm @14.4V ≤1% THD + N]; 75W RMS x 4 [2 ohm @ 14.4V ≤ 1% THD + N]
• S/N ratio: 81dB (ref: 1W into 4 ohm)
• SRI: $230.00

PDR Digital Amplifiers

PDR-M65 Mono Power Density Reference Amplifier

• CEA-2006 amplifier ratings: 450W RMS x1 (4ohm, 14.4V ≤0.09% THD+N); 650W RMS x1 (2ohm, 14.4V ≤0.07% THD+N)
• S/N ratio: 87dB (ref: 1W into 4 ohm), >113dB (ref: rated power into 4 ohm)
• Watts per square inch: 5.6
• Damping factor >1500
• Remote bass knob compatible (requires RUX-KNOB, sold separately)
• SRI: $450.00

PDR-F50 4/3/2 Channel Power Density Reference Amplifier

• CEA-2006 amplifier ratings: 85W RMS x4 (4ohm, 14.4V ≤0.09% THD+N); 125W RMS x4 (2ohm, 14.4V ≤0.07% THD+N)
• S/N ratio: 87dB (ref: 1W into 4 ohm), >106dB (ref: rated power into 4 ohm)
• Watts per square inch: 4.3
• Damping factor >500
• SRI: $450.00

PDR-V75 5-Channel Power Density Reference Amplifier

• CEA-2006 amplifier ratings: 75W RMS x4 + 250W RMS x1 (4ohm, 14.4V ≤0.09% THD+N); 100W RMS x4 + 350W RMS x1 (2ohm, 14.4V ≤0.07% THD+N)
• S/N ratio: 87dB (CH1-5 [ref: 1W into 4 ohm]), >105dB (CH1-4)/110dB (CH5) (ref: rated power into 4 ohm)
• Watts per square inch: 5.4
• Damping factor > 500 (CH1-4), > 1000 (CH5)
• Remote bass knob compatible (requires RUX-KNOB, sold separately)
• SRI: $550.00

PDX Digital Amplifiers

PDX-V9 5 Channel Power Digital Amplifier

• CEA-2006 amplifier ratings: 100W RMS x 4 + 500W x 1 [4/2 ohm @ 14.4V ≤ 0.05% THD+N]
• S/N ratio: 94dB (ref: 1W into 4 ohm)
• Remote bass knob compatible (requires RUX-KNOB, sold separately)
• SRI: $750.00

PDX-M12 Mono Power Amplifier

• CEA-2006 amplifier ratings: 1200W RMS x 1 [4/2 ohm @ 14.4V ≤ 0.04% THD+N]
• S/N ratio: 92 dB (ref: 1W into 4 ohm)
• Remote bass knob compatible (requires RUX-KNOB, sold separately)
• SRI: $900.00

PDX-M6 Mono Power Amplifier

• CEA-2006 amplifier ratings: 600W RMS x 1 [4/2 ohm @ 14.4V ≤ 0.02% THD+N]
• S/N ratio: 95 dB (ref: 1W into 4 ohm)
• Remote bass knob compatible (requires RUX-KNOB, sold separately)
• SRI: $550.00

PDX-F6 4/3/2 Channel Power Amplifier

• CEA-2006 amplifier ratings: 150W RMS x 4 [4/2 ohm @ 14.4V ≤0.05% THD+N]
• S/N ratio: 94 dB (ref: 1W into 4 ohm)
• SRI: $850.00

PDX-F4 4/3/2 Channel Power Amplifier

• CEA-2006 amplifier ratings: 100W RMS x 4 [4/2 ohm @ 14.4V ≤ 0.05% THD+N]
• S/N ratio; 95 dB (ref: 1W into 4 ohm)
• SRI: $550.00

X-Power Digital Amplifier

MRX-M110 Mono Digital Amplifier

• CEA-2006 amplifier ratings: 650W RMS x 1 [4 ohm @14.4V ≤1% THD + N]; 1100W RMS x 1 [2 ohm @ 14.4V ≤ 1% THD + N]
• S/N ratio: 90dB (ref: 1W into 4 ohm)
• Remote bass knob compatible (requires RUX-KNOB, sold separately)
• SRI: $450.00

Power Pack Amplifiers

KTP-445A Power Pack Amplifier for Alpine Head Units

• CEA-2006 amplifier ratings: 45W RMS x 4 [4/2 ohm @ 14.4V ≤ 1% THD+N]
• S/N ratio: 82 dB (ref: 1W into 4 ohm)
• Compatible with select Alpine head units, 2005 and newer
• SRI: $160.00

KTP-445U Universal Power Pack Amplifier

• CEA-2006 amplifier ratings: 45W RMS x 4 [4/2 ohm @ 14.4V ≤ 1% THD+N]
• S/N ratio: 80 dB (ref: 1W into 4 ohm)
• SRI: $180.00

KTP-190U Universal Mono Head Unit Power Pack

• CEA-2006 amplifier ratings: 90W RMS x 1 [1 ohm @ 14.4V ≤ 1% THD+N]
• S/N ratio: 80 dB (ref: 1W into 1 ohm)
• SRI: $130.00

Remote Bass Knob

RUX-KNOB Remote Bass Knob

• Add-on remote bass control for PDX-M12, PDX-M6, PDX-V9, MRX-110, PDR-M65, PDR-V75, MRV-V500 and MRV-M250
• SRI: $40.00

Notice: Product information is based upon current information at the time of press, but cannot be guaranteed. All designs, features, specifications and delivery dates are subject to change without notice.

V-Power is a registered trademark of Alpine Electronics, Inc.

About Alpine Electronics
Alpine Electronics is an automotive electronics manufacturer that provides consumers and leading auto makers with audio, video, navigation and driver assistance products. The company specializes in system integration solutions with innovative vehicle entertainment and information technologies.

Alpine’s R&D and manufacturing facilities in Japan, China, Europe and North America ensure that all products address the real world requirements of drivers in each market. The company is committed to developing safe, comfortable and eco-friendly automotive electronics products.

For more information about Alpine’s aftermarket products, visit www.alpine-usa.com.

Reach us on:
Facebook | Instagram | Twitter