Download the Bluetooth firmware update file and follow instructions (below) carefully here:
Download the Update:
- Download the Bluetooth firmware update (zipped folder) to the computer that will be used to perform this update.
- Save the update (zipped folder) onto your computer desktop so that it can be easily found later.
- Unzip the content (file) to a USB flash drive. The extracted content will include the firmware update file named “BTFW_C500.bin”. The “BTFW_C500.bin” file should now be in the root directory of the USB flash drive.
Updating the CDE-147BT:
- Plug-in the USB flash drive (with FW update loaded) into the CDE-147BT.
- Push and hold the SETUP button.
- Use the volume knob to select Bluetooth, then press ENTER (volume knob).
- Use the volume knob to select FW Update, then press ENTER (volume knob).
- Use the volume knob to select YES, then press ENTER (volume knob).
- “Updating”, “Don’t Touch Any Button” should be displayed. The update process should take about 4 minutes and 30 seconds. Do not power the unit off during this process.
- When “Updated” is displayed, cycle ignition OFF and remove USB flash drive.
- Update is complete. You may now cycle the ignition ON and use the radio.
- If you would like to verify the update you can access the FW information by following steps 1-2 and select FW Version. The display should read “C500”.
WARNING: This update is specifically designed to work with units sold in the U.S. and Canada with the operating system requirements on this page. Using this firmware update on units sold outside the U.S. and Canada, and use of an operating system outside the requirement(s) of this update will cause damage to the unit. If you are not sure if you need this update, please contact customer service for help.
Bluetooth Firmware Update C500: Download
Note: The contents of the folder will include the Firmware Update file.