MRX-F65 4/3/2 Channel Power Amplifier
Features and Specification
SPECIFICATIONSCEA-2006 Power Ratings
- CEA-2006 Power Rating: 110W RMS x 4 (4-ohm, 14.4V at <1% THD+N)
Max Power Output Ratings
RMS Power Ratings
- Per channel into 4 Ohms: 110W RMS x 4 (14.4V at Ƈ% THD+N)
- Per channel into 2 Ohms: 160W RMS x 4 (14.4V at Ƈ% THD+N)
- Bridged 4 Ohms: 320W RMS x 2 (14.4V at Ƈ% THD+N)
Sound Tuning
- Crossover Frequency (HPF): 50 - 400 Hz, -12dB/oct.
- Crossover Frequency (LPF): 50 - 400 Hz, -12dB/oct.
- EQ (Equalizer): 0 to +12dB (CH3/4, fc=50Hz)
Dimensions
- Foot Print (WxHxD) mm: 270 x 58 x 230 mm
- Foot Print (WxHxD) in: 10-5/8'' x 2-1/4'' x 9''
- Heat Sink (WxHxD) mm: 210 x 58 x 230 mm
- Heat Sink (WxHxD) in: 8-1/4'' x 2-1/4'' x 9''
General
- Power Requirements: 14.4 V.DC (11-16V allowable)
- Input Sensitivity (RCA Input): 0.2 - 4.0 V
- Input Sensitivity (Speaker Level Input): 0.5 - 10 V
- Input Impedance: >10k ohms
- Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 5 - 45k Hz
- THD+N (10W into 4 Ohms) for CH-1/2/3/4: Ɔ.02 %
- THD+N (100W into 4 Ohms) for CH-1/2/3/4: Ɔ.07 %
- Damping Factor for CH-1/2/3/4: >500
- Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 106 dB
- Weight: 2.7 kg
FEATURESInstall
- Terminal Layout: Two-Sided
- Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
General
- Amplifier Type: Class-D (Digital)
- Channel Design: 4/3/2 Channel
- Power Supply Design: DC-DC PWM Power Supply
- Power Supply: MOSFET
- Final Outputs: Direct FET
- Crossover: Variable Low Pass & Hiigh Pass Filter
- Gain Control: Continuously Adjustable Gain Control
- Bass EQ: Bass EQ Function
- Thermal Control: Multi-stage Power Limiting
- Low-impedance Possibility: Low-impedance Possibility
- Current Protection: Over-Current, Over-Voltage and Thermal Protection
- Board Circuitry: S.T.A.R. Circuit
- Board Design: 6-layer Glass Epoxy PC Board
- Speaker-Level Inputs: 4-channel Speaker Level Inputs
- Power Indicator: Top Mounted Blue LED Power Indicator